GNU/Linux

Im Downloadbereich:
fstab
lilo.conf
ntp.conf
modprobe.conf
3ddesktop.conf

Downloadbereich

Halt:

# chmod a=rwx,-s /sbin/halt
# chmod 4555 /sbin/halt

Suspend (echo [mem|disk] > /sys/power/state)

# chmod 777 /sys/power/state

Bezueglich syspend wird noch ein Script folgen.

http://gentoo-wiki.com/HARDWARE_HUAWEI_E220_HSDPA_USB_MODEM

Zusammenfassung vom wichtigsten:

zgrep "CONFIG_USB_SERIAL_GENERIC" /proc/config.gz
zgrep "CONFIG_PPP" /proc/config.gz
zgrep "CONFIG_PPP_ASYNC" /proc/config.gz

Alles sollte modular sein...

Device Drivers --->
USB support --->
< M > OHCI HCD support

Device Drivers --->
Network device support --->
< M > PPP (point-to-point protocol) support
< M > PPP support for async serial ports

modprobe usbserial vendor=0x12d1 product=0x1003

Von http://www.kanoistika.sk/bobovsky/archiv/umts/ das c Programm runterladen...

gcc huaweiAktBbo.c -o huaweiAktBbo
mv huaweiAktBbo /mybin/

Aber man kann auch gleich eins der *.out Datein nehmen, und es mit dem Versuchen.

Das war mal vom Gentoo Wiki...

Falls die Nodes in /dev noch nicht dargestellt werden:

mknod /dev/ttyUSB0 c 188 0
mknod /dev/ttyUSB1 c 188 1
mknod /dev/ttyUSB2 c 188 2

Und so starte ich das Ganze:

#!/bin/sh
modprobe usbserial vendor=0x12d1 product=0x1003
huaweiAktBbo-i386.out
setpin
ifconfig eth0 down
ifconfig eth1 down
echo "nameserver 213.94.78.16 \nnameserver 213.94.78.17" > /etc/resolv.conf
xterm -title 'huawei status' he220stat &
wvdial hsdpa

Scripts und Configs unter Downloads...

http://mark.nanihil.com/downloads/screenshot

#!/bin/bash

DIR="${HOME}/screenshots"
DATE="$(date +%Y%m%d@%H%M%S)"
NAME="${DIR}/screenshot-${DATE}.png"
LOG="${DIR}/screenshots.log"

# Testen, ob das Verzeichniss zum speichern der Screenshots existiert, andernfalls wird es erstellt
if [ ! -d "${DIR}" ]; then mkdir "${DIR}"; fi

# Screenshot von einem Fenster
if [ "$1" = "win" ]; then import "${NAME}"; fi

# Screenshot des gesamten Bildschirms
if [ "$1" = "scr" ]; then import -window root "${NAME}"; fi

# Screenshot von einem Bereich
if [ "$1" = "area" ]; then import "${NAME}"; fi

# Haenge den Dateinamen an die Logdatei an
echo "${NAME}" >> "${LOG}"

Siehe [Conf] .fluxbox/keys fuer Anwendung.

Orginal von: http://de.gentoo-wiki.com/Screenshot_mit_Drucktaste

Downloadbereich

OnDesktop Mouse1 :hideMenus
OnDesktop Mouse2 :workspaceMenu
OnDesktop Mouse3 :rootMenu
OnDesktop Mouse4 :nextWorkspace
OnDesktop Mouse5 :prevWorkspace

Mod1 Tab :NextWindow
Mod1 Shift Tab :PrevWindow

Mod1 F1 :Workspace 1
Mod1 F2 :Workspace 2
Mod1 F3 :Workspace 3
Mod1 F4 :Workspace 4
Mod1 F5 :Workspace 5


Control F13 :execCommand screenshot win
None F13 :execCommand screenshot scr

None F14 :execCommand xmms -t
None F15 :execCommand amixer sset Master toggle
None F16 :execCommand xmms -f
None F17 :execCommand xmms -s
None F18 :execCommand xmms -r
None F19 :execCommand amixer sset Master 5%-
None F20 :execCommand amixer sset Master 5%+
None F21 :execCommand xset -dpms
None F22 :execCommand xset dpms 10 10 10

Mod4 k :KillWindow
Mod4 r :Reconfigure
Mod4 q :ExecCommand ~/torsmo/quote.sh d
Mod4 e :ExecCommand xfe
Mod4 f :ExecCommand firefox
Mod4 x :ExecCommand xmms -t
Mod4 c :Close
Mod4 w :ExecCommand ~/wecker
Mod4 a :RootMenu
Mod4 l :ExecCommand xlock -mode blank
Mod4 Shift a :WindowMenu
Mod4 t :ExecCommand thunderbird
Mod4 Shift t :ToggleDecor
Mod4 s :ShadeWindow
Mod4 Shift s :StickWindow
Mod4 h :MaximizeHorizontal
Mod4 v :MaximizeVertical
Mod4 m :MaximizeWindow
Mod4 Shift m :Minimize

Mod4 d :ExecCommand /mybin/3ddeskfx
Mod4 Shift d :ExecCommand /mybin/3ddeskfx mode 4
Mod4 Right :ExecCommand 3ddesk --gotoright --nozoom
Mod4 Left :ExecCommand 3ddesk --gotoleft --nozoom

# slocate terminfo

Oder schoener:

# find /usr/share/terminfo -type f | sed 's/.*\/\(.*\)/\1/g'

Danke an doomy!

Downloadbereich

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "Files"

# ModulePath "/usr/X11R6/lib/modules"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic/"
EndSection


Section "Module"
Load "dbe"
SubSection "extmod"
Option "omit xfree86-dga"
EndSubSection
Load "type1"
Load "freetype"
Load "glx"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "int10"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "synaptics"
Option "CorePointer"
Option "ShmConfig" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28.0 - 84.0
VertRefresh 43.0 - 80.0

Option "DPMS"
EndSection

Section "Device"
Identifier "Intel Corporation Mobile Integrated Graphics Controller"
Driver "i810"
BusID "PCI:0:2:0"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile Integrated Graphics Controller"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1280x800"
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection

Section "Extensions"
Option "Composite" "Enable"
Option "RENDER" "Enable"
EndSection

Fehlermeldung:

fusermount: mount failed: Operation not permitted

Loesung:

# locate fuse.SlackBuild - Script vom Package suchen
# /usr/src/slackbuilds/fuse/fuse.SlackBuild - ausfuehren
# upgradepkg /tmp/fuse-2.6.5_2.6.20.2-i486-1mbox.tgz - installieren
# chmod 4755 /usr/bin/fusermount - Rechte richtig vergeben
# sshfs me@server: server - benutzen

Downloadbereich

#Based on http://www.michael-prokop.at/computer/config/.zshrc + others
PROMPT=$'%n@%m %0(3c,%c,%~) %0(?,%{\e[0;32m%}:%),%{\e[0;31m%}:(%s)%b %# '

type compinit &>/dev/null || { autoload -U compinit && compinit }

export COLORTERM="yes"

alias -g C='|wc -l'
alias -g M='| more'
alias -g G='| grep'
alias -g dt='dmesg | tail'
alias -g T='| tail'
alias -g N='&>/dev/null'
alias 'mbox'='screen -x mbox'

# Xterm resizing-fu.
# Based on http://svn.kitenet.net/trunk/home-full/.zshrc?rev=11710&view=log (by Joey Hess)
alias hide='echo -en "\033]50;nil2\007"'
alias tiny='echo -en "\033]50;-misc-fixed-medium-r-normal-*--80-*--c-*-iso8859-15\007"'
alias small='echo -en "\033]50;6x10\007"'
alias medium='echo -en "\033]50;-misc-fixed-medium-r-normal--13-120-75-75-c-80-iso8859-15\007"'
alias default='echo -e "\033]50;-misc-fixed-medium-r-normal-*--140-*--c-*-iso8859-15\007"'
alias large='echo -en "\033]50;-misc-fixed-medium-r-normal-*--150-*--c-*-iso8859-15\007"'
alias huge='echo -en "\033]50;-misc-fixed-medium-r-normal-*--210-*--c-*-iso8859-15\007"'
alias smartfont='echo -en "\033]50;-artwiz-smoothansi-*--*--*--*--*--*-\007"'
alias semifont='echo -en "\033]50;-misc-fixed-medium-r-semicondensed-*--120-*--*--iso8859-15\007"'

# listing stuff
alias dir="ls -lSrah"
alias lad='ls -d .*(/)' # only show dot-directories
alias lsa='ls -a .*(.)' # only show dot-files
alias lss='ls -l (s,S,t)' # only files with setgid/setuid/sticky flag
alias lsl='ls -l (@[1,10])' # only symlinks
alias lsx='ls -l (*[1,10])' # only executables
alias lsw='ls -ld (R,W,X.^ND/)' # world-{readable,writable,executable} files
alias lsbig="ls -flh (.OL[1,10])" # display the biggest files
alias lsd='ls -d (/)' # only show directories
alias lse='ls -d (/^F)' # only show empty directories
alias lsnew="ls -rl (D.om[1,10])" # display the newest files
alias lsold="ls -rtlh (D.om[1,10])" # display the oldest files
alias lssmall="ls -Srl (.oL[1,10])" # display the smallest files

mdiff() { diff -udrP "$1" "$2" > diff.`date "+%Y-%m-%d"`."$1" }
memusage(){ ps aux | awk '{if (NR > 1) print $5; if (NR > 2) print "+"} END { print "p" }' | dc }
shtar() { gunzip -c $1 | tar -tf - -- | $PAGER }
shtgz() { tar -ztf $1 | $PAGER }
shzip() { unzip -l $1 | $PAGER }

# list files which have been modified within the last x days
new() { print -l (m-$1) }

# UTF-8 change
isutfenv () {
case "$LANG $CHARSET $LANGUAGE" in
(*utf*) return 0 ;;
(*UTF*) return 0 ;;
(*) return 1 ;;
esac
}

alias term2iso="echo 'Setting terminal to iso mode' ; echo -e '^[%@'"
alias term2utf="echo 'Setting terminal to utf-8 mode'; echo -e '^[%G'"

# alias utf2iso=`if isutfenv ; then
# for ENV in 'env | grep UTF' ; do
# eval export "$(echo $ENV | sed 's/UTF-8/iso885915/')"
# done
# fi`

# alias iso2utf=`if isutfenv ; then
# for ENV in 'env | grep "\.iso"' ; do
# eval export '$(echo $ENV | sed "s/iso.*/UTF-8/")'
# done
# fi`

#if [[ "$TERM" == screen ]]; then
bindkey "\e[1~" beginning-of-line # home
bindkey "^[[4~" end-of-line # End
bindkey "^[[A" up-line-or-search # cursor up
bindkey "^[[B" down-line-or-search # -
bindkey '^x' history-beginning-search-backward # alternative ways of searching the shell history
# bindkey '\e[7~' beginning-of-line # home
# bindkey '\e[8~' end-of-line # end
#fi

fetchmail 1> /dev/null 2>&1

OARK=`ps -ef | grep screen..x.mbox | grep -v grep`
if [ ! "$OARK" ] ; then
#conky -c ~/torsmo/server_info 1> /dev/null 2>&1
conky -c ~/torsmo/icq_msg 1> /dev/null 2>&1
pkill osdsh ; pkill osdctl ; sleep 1 ; osdsh -o 1 -p 1
screen -x mbox
fi

http://project-run.com/index.php?serendipity[subpage]=Downloadbereich

#Based on http://www.michael-prokop.at/computer/config/.zshrc + others
PROMPT=$'%n@%m %0(3c,%c,%~) %0(?,%{\e[0;32m%}:%),%{\e[0;31m%}:(%s)%b %# '

type compinit &>/dev/null || { autoload -U compinit && compinit }

export COLORTERM="yes"

(( ${+BROWSER} )) || export BROWSER="firefox"
(( ${+PAGER} )) || export PAGER="less"

alias -g C='|wc -l'
alias -g M='| more'
alias -g G='| grep'
alias -g dt='dmesg | tail'
alias -g T='| tail'
alias -g N='&>/dev/null'
alias -g nanihil='ssh -X -Y -L1431:localhost:143 -L1432:localhost:25 -L8080:localhost:8080 mkeeper@213.239.217.213'

# Xterm resizing-fu.
# Based on http://svn.kitenet.net/trunk/home-full/.zshrc?rev=11710&view=log (by Joey Hess)
alias hide='echo -en "\033]50;nil2\007"'
alias tiny='echo -en "\033]50;-misc-fixed-medium-r-normal-*--80-*--c-*-iso8859-15\007"'
alias small='echo -en "\033]50;6x10\007"'
alias medium='echo -en "\033]50;-misc-fixed-medium-r-normal--13-120-75-75-c-80-iso8859-15\007"'
alias default='echo -e "\033]50;-misc-fixed-medium-r-normal-*--140-*--c-*-iso8859-15\007"'
alias large='echo -en "\033]50;-misc-fixed-medium-r-normal-*--150-*--c-*-iso8859-15\007"'
alias huge='echo -en "\033]50;-misc-fixed-medium-r-normal-*--210-*--c-*-iso8859-15\007"'
alias smartfont='echo -en "\033]50;-artwiz-smoothansi-*--*--*--*--*--*-\007"'
alias semifont='echo -en "\033]50;-misc-fixed-medium-r-semicondensed-*--120-*--*--iso8859-15\007"'

# listing stuff
alias dir="ls -lSrah"
alias lad='ls -d .*(/)' # only show dot-directories
alias lsa='ls -a .*(.)' # only show dot-files
alias lss='ls -l (s,S,t)' # only files with setgid/setuid/sticky flag
alias lsl='ls -l (@[1,10])' # only symlinks
alias lsx='ls -l (*[1,10])' # only executables
alias lsw='ls -ld (R,W,X.^ND/)' # world-{readable,writable,executable} files
alias lsbig="ls -flh (.OL[1,10])" # display the biggest files
alias lsd='ls -d (/)' # only show directories
alias lse='ls -d (/^F)' # only show empty directories
alias lsnew="ls -rl (D.om[1,10])" # display the newest files
alias lsold="ls -rtlh (D.om[1,10])" # display the oldest files
alias lssmall="ls -Srl (.oL[1,10])" # display the smallest files

dwicti() { ${=BROWSER} http://de.wiktionary.org/wiki/${(C)1// /_} }
ewicti() { ${=BROWSER} http://en.wiktionary.org/wiki/${(C)1// /_} }
wikide () { ${=BROWSER} http://de.wikipedia.org/wiki/"${(C)*}" }
wikien() { ${=BROWSER} http://en.wikipedia.org/wiki/"$*" }
google() { ${=BROWSER} "http://www.google.at/search?hl=de&num=100&q=$*" }
mdiff() { diff -udrP "$1" "$2" > diff.`date "+%Y-%m-%d"`."$1" }
memusage(){ ps aux | awk '{if (NR > 1) print $5; if (NR > 2) print "+"} END { print "p" }' | dc }
oleo() { ${=BROWSER} "http://dict.leo.org/?search=$*" }
shtar() { gunzip -c $1 | tar -tf - -- | $PAGER }
shtgz() { tar -ztf $1 | $PAGER }
shzip() { unzip -l $1 | $PAGER }
swiki() { ${=BROWSER} http://de.wikipedia.org/wiki/Spezial:Search/${(C)1} }

# list files which have been modified within the last x days
new() { print -l (m-$1) }

# ogg2mp3 with bitrate of 192
ogg2mp3_192() {
oggdec -o - ${1} | lame -b 192 - ${1:r}.mp3
}

# UTF-8 change
isutfenv () {
case "$LANG $CHARSET $LANGUAGE" in
(*utf*) return 0 ;;
(*UTF*) return 0 ;;
(*) return 1 ;;
esac
}

alias term2iso="echo 'Setting terminal to iso mode' ; echo -e '^[%@'"
alias term2utf="echo 'Setting terminal to utf-8 mode'; echo -e '^[%G'"

alias utf2iso=`if isutfenv ; then
for ENV in 'env | grep UTF' ; do
eval export "$(echo $ENV | sed 's/UTF-8/iso885915/')"
done
fi`
alias iso2utf=`if isutfenv ; then
for ENV in 'env | grep "\.iso"' ; do
eval export "$(echo $ENV | sed 's/iso.*/UTF-8/')"
done
fi`

#if [[ "$TERM" == screen ]]; then
bindkey "\e[1~" beginning-of-line # home
bindkey "^[[4~" end-of-line # End
bindkey "^[[A" up-line-or-search # cursor up
bindkey "^[[B" down-line-or-search # -
bindkey '^x' history-beginning-search-backward # alternative ways of searching the shell history
# bindkey '\e[7~' beginning-of-line # home
# bindkey '\e[8~' end-of-line # end
#fi

# Startx - if x is not already started
# case `/usr/bin/tty` in /dev/tty[0-9]*)
XPID=$(/sbin/pidof xinit)
if [ -z "$XPID" ] ; then
startx ; exit
fi
# esac

if [ ! `/sbin/pidof skippy` ] ; then
skippy &
fi

if [ ! `/sbin/pidof esd` ] ; then
esd -nobeeps &
fi

if [ $(/sbin/ifconfig | /usr/bin/grep "inet addr" | cut -f 2 -d: | cut -f 1 --delimiter=" " | /usr/bin/grep 192 | cut -f 1 --delimiter=".") = "192" -a ! `/sbin/pidof synergys` ] ; then
synergys -c synergy.conf
fi

if [ ! `/sbin/pidof ssh` ] ; then
sshfs -o gid=1000,uid=1000 mkeeper@nanihil.com: nanihil/
ssh -X -Y -L1431:localhost:143 -L1432:localhost:25 -L8080:localhost:8080 mkeeper@213.239.217.213
fi

if [ ! `/sbin/pidof sshfs` ] ; then
sshfs -o gid=1000,uid=1000 mkeeper@nanihil.com: nanihil/
fi

#sb_filter=`ps aux | grep sb_imapfilter | grep -v grep`
#if [ $? = "1" -a `/sbin/pidof ssh` ] ; then
#python /usr/bin/sb_imapfilter.py -c -t -l 30 &
#fi